Cutting Tools

Timber Wolf Bandsaw Blade 1/2' X 105', 4 TPI

Timber Wolf Bandsaw Blade 1/4' X 131.5' 6 TPI BCAC30837

Bosch BS6412-24M 64-1/2-Inch by 1/2-Inch by 24TPI Metal Bandsaw Blade

Timber Wolf Bandsaw Blade 115' x 1/4' x 6 TPI Positive Claw PS Wood Machines

Dorian Tool E04H-STUCR-1.2 Solid Carbide Shank Indexable Boring Bar, 1/4' Shank Diameter 1/4 Shank Diameter 73310159751

HHIP 1030-0501 BBL8 Indexable Boring Bar ABS Import Tools Inc.

Micro 100 QPF-1801000 Quick Change Boring and Profiling Tool, Solid Carbide Tool, 0.180' (4.57 mm) Minimum Bore Diameter, 1.000' (25.4 mm) Maximum Bore Depth, 0.080' (2.03 mm) Projection, 0.008' (0.20 mm) Tool Radius, 0.2500' (6.4 mm) Shank Diameter, 2.5'

HHIP 1015-1250 1-1/4 x 16 x 1/2 (Bit) Inch Double End Boring Bar, 90/45 Degree ABS Import Tools Inc.

Micro 100 QIT-160250X Quick Change Internal Single Point Threading Tool, Solid Carbide Tool, AlTiN Coated, 0.160' (4.06 mm) Minimum Bore Diameter, 0.040' (1.02 mm) Projection, 0.250' (6.35 mm) Maximum Bore Depth, 0.023' (0.58 mm) Offset Point, 20 to 56 Thr

Micro 100 40-2400 Indexable Coolant-Thru Boring Bar, 3-piece Set Micro 100 Tool Corporation

Aloris Tool AXA-100 Boring Bar Holder

HHIP 1001-0028 5/8 x 8 Inch Shank S-SCLCR10-3 Indexable Boring Bar with Insert ABS Import Tools Inc.

Micro 100 QFR-118-12 Quick Change Full Radius Grooving Tool, Solid Carbide Tool, 0.118' (3.00 mm) Groove Width, 0.150' (3.81 mm) Projection, 0.495' (12.6 mm) Minimum Bore Diameter, 0.750' (19.1 mm) Maximum Bore Depth, 0.5000' (12.7 mm) Shank Diameter, 2.5'

Micro 100 QRB-3601500X Quick Change Reverse Boring Tool, Solid Carbide Tool, AlTiN Coated, 0.360' (9.14 mm) Minimum Bore Diameter, 1.500'(38.1 mm) Maximum Bore Depth, 0.163'(4.14 mm) Tool Head Length, 0.130'(3.30 mm) Projection, 0.008'(0.20 mm) Tool Radius

CNGX 1PC SER1616H16 Threading Lathe Turning Tool Holder With 16ER 14W SMX30 inserts

HHIP 1001-0741 Round Shank Indexable Boring Bar, 2-3/4' x 1/2' 2-3/4 x 1/2

SI-MTUN R/L Boring Bars SI-MTUNR 20-4, Shank: 1-1/4', Min Bore: 1.530', OAL: 14', Center Line F: .765', Use with TNM Insert: 43_ , RH Shank: 1-1/4 Min Bore: 1.530 OAL: 14 Center Line F: .765 Bison

Boring Head 2' With MT3 Shank 3/8-16 Thread And 9PCS 1/2'Boring Bar Sets ONESTEP-TOOLS

Glanze 800035 3/8' Steel Boring Bar Coolant Through, A06J SDUCR-2 DCMT 21.5, Nickel Finish Shobha Industries G800035

1P MGEHR1212-2 +MGEHL1212-2 CNC Grooving Boring Tool Holder + 10P MGMN200-G LDA CNGX